CUTLIST.
← Explore
TikTok · 3.8MTikTok · 3.8MIllustrative image

Fabrication Sheet · Living Room

Reeded Bestå Media Console

Intermediate7 hours€245 – €336

Identified base piece

IKEA Bestå frame 180×40×38 + doors

Art. 190.459.45 · €149–€201 · IKEA Portugal

Buy ↗
Workbench Mode · Maker ProSave

Materials & cuts

  • Oak slats 20×10 mm × 2.4 m × 20 pcsBauhaus · Bulky€55–€78Buy ↗
  • Metal legs 15 cm × 4 pcsAmazon · Small€27–€37Buy ↗
  • Hardwax oil × 250 mlAmazon · Small€14–€20

  1. Front slats

    Qty 96
    Length
    380mm
    Width
    20mm
    Thickness
    10mm

    Planed pine strip · Edge: No edge banding

Dimension check: all cuts fit IKEA Bestå frame 180×40×38 + doors.

Toolbox

  • ↺ Beginner swap: Assembly adhesive and clamps

  • ↺ Beginner swap: Sanding block, 180 grit

Safety & PPE

Safety glassesHearing protectionNitrile gloves for oil
  • Anchor the unit to the wall with the anti-tip kit.
  • Oil-soaked rags: lay flat outside to dry.

Estimated budget

  • Base piece€149 – €201
  • Dimensioned lumber & sheet goods€55 – €78
  • Hardware & consumables€42 – €56
Total build cost€245 – €336

Most likely estimate€288.00

Step by step

Preparation

  1. 01Assemble the Bestå frame and fit metal legs.

Cutting

  1. 02Cut slats to 380 mm with a stop block.

Assembly

  1. 03Nail slats side by side on doors with a 3 mm spacer.

Finishing

  1. 04Sand, apply two coats of oil and hang the doors.

Unlock the full cut list, printable guide and Workshop Mode for this project.