CUTLIST.
← Explore
TikTok · 1.4MTikTok · 1.4MIllustrative image

Fabrication Sheet · Bedroom

Fluted Eket Nightstands

Beginner3 hours€83 – €115

Identified base piece

IKEA Eket module with door (×2)

Art. 603.339.47 · €51–€69 · IKEA Portugal

Buy ↗
Workbench Mode · Maker ProSave

Materials & cuts

  • Pine half-round moulding 12 mm × 2.4 m × 8 pcsBauhaus · Bulky€20–€30Buy ↗
  • Assembly adhesive × 1 tubeAmazon · Small€5–€7
  • Spray paint × 1 canAmazon · Small€7–€9

  1. Door half-round mouldings

    Qty 40
    Length
    330mm
    Width
    12mm
    Thickness
    6mm

    Thin plywood / MDF · Edge: No edge banding

Dimension check: all cuts fit IKEA Eket module with door (×2).

Toolbox

  • ↺ Beginner swap: Miter box and handsaw

Safety & PPE

Safety glassesRespirator for spray painting
  • If hanging the modules on the wall, use the dedicated Eket hardware.

Estimated budget

  • Base piece€51 – €69
  • Dimensioned lumber & sheet goods€20 – €30
  • Hardware & consumables€12 – €16
Total build cost€83 – €115

Most likely estimate€98.00

Step by step

Preparation

  1. 01Assemble the two Eket modules and clean the doors.

Cutting

  1. 02Cut half-round mouldings to 330 mm with a stop block.

Assembly

  1. 03Glue half-round mouldings side by side on doors from the centreline outwards.

Finishing

  1. 04Spray paint in two thin coats and mount the doors.

Unlock the full cut list, printable guide and Workshop Mode for this project.