CUTLIST.
← Explore
Instagram · 2.6MInstagram · 2.6MIllustrative image

Fabrication Sheet · Entryway

Half-Moon Frosta Console

Beginner3 hours€47 – €63

Identified base piece

IKEA Frosta stool (×2)

Art. 601.066.02 · €25–€34 · IKEA Portugal

Buy ↗
Workbench Mode · Maker ProSave

Materials & cuts

  • Wood glue × 1 bottleAmazon · Small€5–€7
  • Matching satin paint × 750 mlAmazon · Small€16–€22Buy ↗

  1. Seats cut in half

    Qty 2
    Length
    350mm
    Width
    175mm
    Thickness
    18mm

    MDF / particleboard · Edge: No edge banding

Dimension check: all cuts fit IKEA Frosta stool (×2).

Toolbox

  • ↺ Beginner swap: Coping saw

Safety & PPE

Safety glassesDust mask
  • Support the seat plywood well before cutting — it chips easily.

Estimated budget

  • Base piece€25 – €34
  • Hardware & consumables€21 – €29
Total build cost€47 – €63

Most likely estimate€54.98

Step by step

Preparation

  1. 01Remove seats from Frosta stools.

Cutting

  1. 02Cut each seat in half with a jigsaw.

Assembly

  1. 03Join the four halves with legs, forming two semicircles.

Finishing

  1. 04Sand edges, paint and join the two halves.

Unlock the full cut list, printable guide and Workshop Mode for this project.