Instagram · 980k

Instagram · 980kIllustrative image

Fabrication Sheet · Entryway

Pegboard Entryway Bench

Beginner4 hours€61 – €83

Identified base piece

IKEA Skådis pegboard

Art. 903.208.02 · €17–€23 · IKEA Portugal

Workbench Mode · Maker ProSave

Materials & cuts

Pine boards 18 mm × 3Bauhaus · Bulky€28–€38Buy ↗
Cushion foam × 1Amazon · Small€16–€22

Seat
Qty 1
Length
1000mm
Width
350mm
Thickness
18mm
MDF / particleboard · Edge: No edge banding

Part	Qty	L × W × T (mm)	Material · edge
Seat	1	1000 × 350 × 18	MDF / particleboard · No edge banding

Dimension check: all cuts fit IKEA Skådis pegboard.

Toolbox

Circular saw
↺ Beginner swap: Order cut-to-size at the store
Drill/driver

Safety & PPE

Safety glassesHearing protection

Anchor the pegboard into solid wall or studs.

Estimated budget

Base piece€17 – €23
Dimensioned lumber & sheet goods€28 – €38
Hardware & consumables€16 – €22

Total build cost€61 – €83

Most likely estimate€71.99

Step by step

Preparation

01Set bench height (45 cm).

Cutting

02Cut the seat and legs.

Assembly

03Screw the frame together.

Finishing

04Paint and add the cushion.

Unlock the full cut list, printable guide and Workshop Mode for this project.